Arctic Air After Shave Serum

//Arctic Air After Shave Serum

Arctic Air After Shave Serum

This cold-process after shave serum is designed with men’s needs in mind. The combination of Natrulon® H-6 and H-10 polyglycerins help moisturize skin. The film forming properties of LaraCare® A200 active helps lock in additional moisture and forms a physical barrier from the elements. Lonzest® DC NT emollient contributes a soft, powder-like after feel. Niacinamide USP and Carnipure® Crystalline actives are well-known skin care actives. The integrity of the formulation is preserved with Geogard® LSA preservative.

Sequence Trade Name INCI Name %
 A Water q.s.
LaraCare® A200 Galactoarabinan 2.00
Butylene Glycol 1.50
 Geogard® LSA Butylene Glycol (and) Benzyl Alcohol (and) Sorbic Acid (and) Caprylic/Capric Triglyceride (and) Lauryl Alcohol (and) Myristyl Alcohol 1.00
Acrylates/C10-30 Alkyl Acrylate Crosspolymer 0.25
Carbomer 0.15
 B  Gel Base BSM5 Cyclomethicone (and) Dimethicone (and) Phenyl Trimethicone 3.00
 Gel Base Sil Cyclomethicone (and) Dimethicone 1.00
 Lonzest® DC NT Dicaprylyl Carbonate 3.00
 Natrulon® H-6 Polyglycerin-6 0.50
 Natrulon® H-10 Polyglycerin-10 0.50
Triethanolamine 0.30
 C Water 5.00
Niacinamide USP Niacinamide  0.50
Carnipure® Crystalline Carnitine 1.00
D SD Alcohol 40-B 2.50
Sodium Polyacrylate (and) Hydrogenated Polydecene (and) Trideceth-6 1.25
Fragrance 0.20
 Glycosperse® L-20 KFG Polysorbate 20 0.40

PROCEDURE:

  1. Charge water of Phase A into the main vessel. Add LaraCare® A200 active of Phase A to the main vessel and begin mixing.
  2. Add remaining ingredients of Phase A to the main vessel in the order listed, mixing well between each ingredient addition. Mix until homogenous.
  3. Add ingredients of Phase B to the main vessel in the order listed, mixing well between each ingredient addition. Mix until homogeneous.
  4. Pre-mix ingredients of Phase C in a separate vessel. Mix until clear solution forms.
  5. Add Phase C to the main vessel. Mix until homogeneous.
  6. Add Rapithix A-60 of Phase D to the main vessel. Mix until homogeneous.
  7. Slowly add alcohol of Phase D to the main vessel. Mix until homogenous.
  8. Pre-mix Glycosperse L-20 solubilizer and fragrance of Phase D in a separate vessel. Add to the main vessel. Mix until homogeneous.
By | 2017-04-13T13:44:56+00:00 April 13th, 2017|0 Comments

About the Author:

Leave A Comment