Fresh sun protection plus anti-aging benefits! BB Secret Cream contains filters to protect the skin from sun damage. It is able to create a smooth and homogenous layer on the skin that hides imperfections, for a natural “soft focus” effect. Thanks to the presence of Olivem® 1000, skin moisture is restored. This unique formula contains Sensolene® to nourish and stimulate the rebuilding of skin’s elasticity, and PROPOLIS Oléoactif® TL to keep the skin healthy and smooth wrinkles. BB Secret Cream provides uniform coverage for perfect skin. The formula was subjected to in vitro analysis and delivered SPF ~ 20, PFA ~ 3 performance with critical wavelength 375 nm.
| Sequence | Trade Name | INCI Name | % |
| A | Ethylhexyl Salicylate [Octisalate] | 4.50 | |
| Ethylhexyl Methoxycinnamate [Octinoxate] | 5.00 | ||
| Octocrylene[Octocrilene] | 4.50 | ||
| HALLBRITE® BHB* | Butyloctyl Salicylate | 2.70 | |
| SENSOLENE® | Ethylhexyl Olivate | 1.80 | |
| Ceteareth-6 Olivate | 1.00 | ||
| OLIVEM® 1000 | Cetearyl Olivate, Sorbitan Olivate | 2.70 | |
| OLIWAX® | Hydrogenated Olive Oil, Olea Europaea (Olive) Fruit Oil, Olea Europaea (Olive) Oil Unsaponifiables | 1.50 | |
| VP/Eicosene Copolymer | 1.00 | ||
| PROPOLIS OLÉOACTIF |
Helianthus Annuus (Sunflower) Seed Oil, Propolis Extract | 0.50 | |
| BHT | 0.10 | ||
| Water (Aqua) (deionized) | Up to 100 | ||
| Glycerin | 1.00 | ||
| Disodium EDTA | 0.05 | ||
| Xanthan Gum | 0.25 | ||
| C | Titanium Dioxide | 4.50 | |
| D | Polysorbate 20 | 5.00 | |
| Iron Oxides | 0.74 | ||
| Iron Oxides | 0.16 | ||
| Iron Oxides | 0.08 | ||
| Ultramarines, Silica | 0.04 | ||
| E | Water (Aqua) (deionized) | 3.00 | |
| F | Silica, Titanium Dioxide, Iron Oxides | 1.00 | |
| Aluminum Starch Octenylsuccinate | 1.00 | ||
| G | Preservative | Phenoxyethanol, Caprylyl Glycol, Chlorphenesin | a.n. |
| BIOCHEMICA® VITAMIN E NATURAL |
Tocopherol | 0.10 |
Formula No. 069-16-04F
PROCEDURE:
1. Prepare phase D wetting the pigments with the binder;
2. Heat phase B up to 80°C-85°C and disperse the thickener of the phase B using a suitable dispersion
unit (e.g. Silverson, Ultra Turrax, etc.);
3. Add phase C into the main vessel under a suitable dispersion unit (e.g. Silverson, Ultra Turrax, etc.);
4. Add phase D into the main vessel and use the water of phase E to wash the phase D;
5. Re-heat the water phase up to 80-85°C;
6. Heat phase A up to 80-85°C and add it into the water phase under a suitable dispersion unit (e.g.
Silverson, Ultra Turrax, etc.) and mix for 3 minutes;
7. Add phase F into the main vessel under a suitable dispersion unit (e.g. Silverson, Ultra Turrax, etc.);
8. Cool down and add phase G while mixing.
Leave A Comment
You must be logged in to post a comment.